Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | |
meshtastic:station [2024/03/17 00:45] – [Meshtastic Mesh Device Station Edition] neilhao | meshtastic:station [2024/03/17 00:46] (current) – [Meshtastic Mesh Device Station Edition] neilhao |
---|
**The Station G1 has been discontinued and has been replaced by the [[https://wiki.uniteng.com/en/meshtastic/station-g2|Station G2]]. Meshtastic Mesh Device Station G2 is an upgraded design of Station G1, using the latest ESP32 S3 MCU. As an RF research project, Station G2 also brings key updates in RF. The primary RF design goal of Station G2 is to improve the Lora receiving sensitivity by about 4dB based on a dedicated Ultra-Low Noise Figure LNA. Also increase the transmit power and improve Signal to Noise ratio of short data packets by designing the Fast-Transient DC-DC for 35dBm Lora PA.** | **The Station G1 has been discontinued and has been replaced by the [[https://wiki.uniteng.com/en/meshtastic/station-g2|Station G2]]. Meshtastic Mesh Device Station G2 is an upgraded design of Station G1, using the latest ESP32 S3 MCU. As an RF research project, Station G2 also brings key updates in RF. The primary RF design goal of Station G2 is to improve the Lora receiving sensitivity by about 4dB based on a dedicated Ultra-Low Noise Figure LNA. Also increase the transmit power and improve Signal to Noise ratio of short data packets by designing the Fast-Transient DC-DC for 35dBm Lora PA.** |
| |
:?: [[https://wiki.uniteng.com/en/meshtastic|Edition Comparisons between our Meshtastic Products]] | :?: [[https://wiki.uniteng.com/en/meshtastic#station-edition|Edition Comparisons between our Meshtastic Products]] |
===== Overview ===== | ===== Overview ===== |
{{ :meshtastic:meshtastic_mesh_device_station_edition_overview.jpg?nolink&400|}} | {{ :meshtastic:meshtastic_mesh_device_station_edition_overview.jpg?nolink&400|}} |